User’s Manual
CNPS9500 AT
Intel Socket 1156/775 CPU
Core i7
Core i5
Core 2 Quad
Core 2 Duo
Core 2 Extreme
Dual Core Pentium
Pentium D
Pentium 4
Celeron D
To ensure safe and easy installation,
please read the following precautions.
V 2.0
3. Components
Thermal Grease
Cooler
User’s Manual
Clip Support
Clip Support Fixing Bolts
Washers
Clip
Clip Fixing Bolts
Nuts
2
.COM
4. Installation Requirements
1) Space Requirements
The cooler’s installation requires unobstructed space with dimensions of 90㎜
(width), 115㎜(length), 135㎜(height), and the CPU as a central reference point.
Please check if components such as ODDs and PSU protrude into the required
space.
2) Air Guide Removal
Air guides on enclosures must be removed, before the cooler’s installation, for
they protrude into the cooler’s required space.
90㎜
135㎜
115㎜
3) Cooler Orientation
It is recommended that the cooler be installed so that air flows from the cooler toward
the enclosure’s rear exhaust fan.
3
.COM
5. Installation
1) Clip Support Installation
Install the Clip Support to the motherboard according to the Socket-type.
Bolt (silver)
Socket 1156
Clip Support
Socket 775
B
/
Washer
M
Nut
Caution
▶ Please make note of the Lever Slot’s direction when
installing the Clip Support.
2) Thermal Grease Application
Clear off any particles or residue from the CPU’s surface then spread
(outwards from center) a thorough layer of Thermal Grease on the CPU
and the base of the cooler.
4
.COM
3) Cooler Installation
Insert the Clip Fixing Bolts to the Clip’s Installation Holes and fasten with a
screwdriver.
4) Fan Connector
Connect the Fan Connector to the motherboard’s PWM fan header (4-Pin).
B
/
M
5
.COM
GS1000 / GS1000SE
• E-ATX / Standard ATX / microATX Compatible
* Supports Intel Dual Xeon server motherboards
• UP to 6 Hot Swap HDD Bays
* GS1000(3 Standard / 3 Optional)
* GS1000 SE(Optional)
• Tool-Free HDD Installation
• Airflow Optimized Design
• Vibration Absorbing HDD Dampers and Feet
• The World’s First Roller Rails for Smooth
& Easy PSU Installation
• Cable Compartment Behind the Motherboard
for Cable Management
• Dedicated Fan Compartment for Fanless PSU Users
• Up to a Total of 8 HDD Bays
* 2 Adaptors & Bezels included for use of two 5.25” bays as 3.5” Internal(HDD)/
External(FDD) Bays
GT1000
• High-End Gaming Enclosure Built with Sturdy
All Aluminum Panels
• Three Tool-Free Hinged Magnetic Panels
(2 Left, 1 Right) for Easy Installation and
Access to Components
• Tool-Free Installation of Disk Drives,
Fan Controlles, Audio Interfaces etc.
• Accommodates up to 6 Hard Drives
• Luxurious and Cool Aesthetics.
• Color Option: Black (Red LED Fans),
Titanium (Blue LED Panel).
For more information, please visit our website.
6
.COM
|